28
2c.
Place the body part to be treated over
the SKIN TONE SENSOR (touching the
unit) the Sensor will immediately read
the skin type.
2e.
If your Skin Tone is suitable for use,
a high-pitched “BEEP” will sound
and the SKIN TONE SENSOR will turn
green and the device is ready for use.
2d.
If your Skin Tone is NOT suitable for
use, the SKIN TONE SENSOR turns solid
YELLOW and the device will “BUZZ”
once for 5 seconds. After 5 seconds,
you may re-try the SKIN TONE SENSOR
(step 1 above).
2f.
Once the device is enabled, the
ENERGY LEVEL LIGHT and BULB LIFE
LIGHT will turn on and the internal fan
will start. Your REMINGTON iLIGHT
Face and Body is set to the lowest
energy level setting and ready for use!
Using Remington iLIGHT Face And Body for Treatment
Summary of Contents for iLIGHT SP6000FUS
Page 6: ...6 Figure 1 iLIGHT Face and Body System Diagram Reference...
Page 54: ...54 Treatment Cards...
Page 55: ...55...
Page 56: ...56 Treatment Cards...
