11
4. PLACE HAND PIECE ON AREA AND
TEST A PATCH OF SKIN
(see page 30)
• If SKIN CONTACT SENSORS are NOT
in contact with skin the system will
"buzz" and will not operate if you
press the FLASH BUTTON. Double
check that the contact sensors are in
full contact with the skin.
• If CONTACT SENSORS are in full
contact with skin the system will
"CHIRP" and is ready to flash.
• If you're having trouble, try pressing
the hand piece firmly against the skin.
• See page 30 for more info on testing a
patch of skin.
5. TREAT YOUR SKIN
(see page 32-36)
• After you hear the "CHIRP" press the
FLASH BUTTON to treat skin
• When a flash is delivered, you will:
– See a bright flash of light
– Hear a "POP" sound
(the disposable cartridge)
– Feel a mild sensation of
warmth and tingling
• LIFT the HAND PIECE off the skin and
move it to a new treatment area
• DO NOT flash the same treatment spot
multiple times during one session
• Try to treat in a GRID PATTERN
Note:
DO NOT physically mark the
treatment area with grid pattern as this
could cause injury to the skin.
Note:
This guide is intended to be a
quick reference for experienced users
of the REMINGTON iLIGHT Face and
Body. If this is your first time using the
REMINGTON iLIGHT Face and Body it
is critical that you read the entire Use
and Care Guide for complete directions
for important contraindications, warn-
ings, benefits and risks and detailed use
instructions.
QUICK REFERENCE GUIDE
SKIN CONTACT SENSORS
Summary of Contents for iLIGHT SP6000FUS
Page 6: ...6 Figure 1 iLIGHT Face and Body System Diagram Reference...
Page 54: ...54 Treatment Cards...
Page 55: ...55...
Page 56: ...56 Treatment Cards...