,
The unit appears to have cracks or is broken.
• Do not use if the unit is damaged. If you have concerns about using the unit, discontinue use and
contact the Remington® Service Centre for further assistance.
,
I have switched the unit ON, but I cannot increase or decrease the energy level.
• Try resetting the unit by turning it off and waiting several seconds before turning it back on.
,
The Bulb Status Indicator Light turns green but the unit does not flash when the button is pressed.
• Make sure the Skin Contact Sensor is in full contact with the skin.
• Try resetting the unit by turning it off and waiting several seconds before turning it back on.
,
There is a strange smell.
• Be sure the area is completely shaved before treatment.
,
The treated areas become red after treatment.
• This is normal and the redness should subside. If not, try using a lower energy level.
,
BE AWARE: If the unit is used over an extended period of time, the unit might automatically disable
momentarily (estimated 40 seconds) to cool down. Once the unit has cooled down, it will be ready to
use again.
LED’s
All currently selected energy level Unit is overheated and is disabled
momentarily to cool down.
All energy level indicators
Unit is malfunctioning. Turn the
try again. If problem persists, the
unit should be returned for repair.
beep
Treatment head is removed or
loose.
SOUNDS
Not full contact.
Flash button was pressed while the
skin contact sensor was not fully
engaged.
Replace bulb.
Bulb is missing or needs to be
replaced.
Skin contact sensors stuck.
Flash button was pressed after the
skin contact sensor had been
engaged since unit start up. Skin
contact sensor may be stuck.
FREQUENTLY ASKED QUESTIONS
Q. What areas of my body can I treat with i-LIGHT®?
A. i-LIGHT® is designed for unisex use on areas below the neck, including the legs, underarms, bikini line,
arms, chest and back. Females can also use on facial hair below the cheekbone.
Q. What are the risks involved with i-LIGHT®. Is it safe?
A.
read and follow the operating instructions and safety warnings.
Q. Is IPL dangerous for the skin after long term use?
A.
light (IPL)
Q. Why is my hair growing despite treatments?
A. Results aren’t immediate, and individual results vary. Most users will begin to notice fewer hairs within
1-2 weeks after beginning treatment. During this time it may look like the hair is still growing, but it is
actually being ‘pushed out’.
phase are susceptible to treatment, which is why multiple treatments are required for optimal result.
Another reason for continued growth could be that the area was missed during a treatment. Repeat
the treatment regime when you notice regrowth.
Q. Why can’t I use
i-LIGHT® after recent sun exposure?
A. Sun exposure causes high levels of melanin to be present and exposes the skin to higher risk of burns
or blisters following treatment.
18
