,
PREPARE THE i-LIGHT® FOR USE
•
Unwrap the hand piece cord from the i-LIGHT® base and rest the hand piece back on the base unit.
• Ensure the power switch on the base unit is OFF.
• Connect the power cord to the i-LIGHT® base unit at the power inlet.
• Connect the power cord to the wall outlet. Turn the power switch ON. (fig. 5)
,
SELECTING THE ENERGY LEVEL
•
The i-LIGHT® is equipped with 5 energy levels. Level 1 is the lowest setting and level 5 is the highest
setting.
,
TIP: For the most effective results, always use the highest energy level that does not cause discomfort
on the skin.
• To determine the energy level being used, observe the number of lights illuminated on the Energy
Level Display (fig. 6).
• Your i-LIGHT® will automatically be set to Energy Level 1 each time the device is powered ON. To
change the level, press the Energy Level Selection Button.
,
TEST THE i-LIGHT® ON YOUR SKIN
,
Before your first full treatment, test the i-LIGHT® on a small patch of skin and wait 24 hours to
ensure there are no adverse reactions.
•
Start at energy level 1.
1 Place the i-LIGHT® hand piece against your skin so the Flash Window is flush with the skin surface.
2 Ensure the Skin Contact Sensors are fully engaged and the Bulb Status Indicator Display is illuminated
green (Fig. 7).
Fig. 5
Fig. 6
13
