HC825AU REMINGTON HIGH PRECISION HAIRCUT KIT
®
Use and Care Instructions
Thank you for purchasing your new Remington® High Precision
Haircut Kit. Your hair clipper is designed to help you maintain
a range of hairstyles for years to come.
For best cutting performance we recommend you read these
instructions thoroughly and keep them in a safe place.
BEFORE CUTTING HAIR
The blades of this clipper are designed to remain
permanently lubricated. They do not need oiling. We have
aligned the blades on your hair clipper prior to shipment.
It is possible the blades may be bumped out of alignment
whilst in transit. Correct blade alignment is essential for
effective cutting.
Compare the blade position on your hair clipper with the
images shown on the left. If the blades are out of alignment
they can be easily adjusted.
1. The end of the top blade should be closer to the body of the
HC825AU SPECIFICATIONS
Power System
Cord
Voltage Type
Single
hair clipper than the bottom blade. This is important so that
the clipper doesn’t cut too close or allow the moving (top)
blade to touch the skin.
2. The bottom blade should be as closely aligned as possible
to the centre of the top blade.
3. If the blades are not correctly aligned, turn the clipper on for
a few moments, turn off and unplug. Loosen the two screws
slightly and manually adjust the bottom blade until it is aligned.
Re-tighten the screws.
4. Ensure the hair clipper is running smoothly, with a slight
vibration, before attempting to cut any hair.
GETTING STARTED
1. Make sure your clipper is operating correctly.
2. Place a cape around the neck of the person whose hair
is being trimmed or cut.
3. This person should be seated so that the top of their head
is at your eye level.
4. Comb the hair as it is normally styled.
5. Comb out all knots and tangles.
6. Hold the hair clipper in the palm of one hand and with your
thumb resting firmly on the top of the hair clipper. This grip
proves comfortable cutting control. Although the hair clipper
2
3
4
5
6
may be used left or right handed, using it right handed allows
you to access the taper lever more easily.
7. Ensure the hair is dry. Hair clippers perform best with dry hair,
making it easier to see how much hair is being cut.
TO ATTACH TRIMMING GUIDES
1. Select an appropriate length trimming guide to match the
desired length of hair to remain after the cut. The trimming
guides are numbered and marked with 3mm, 6mm, 9mm,
12mm, 16mm, 18mm, 22mm and 25mm.
2. Hold comb with teeth up, slide the attachment firmly onto
the bottom clipper blade.
FOR UNIFORM CUTTING
Allow the clipper to cut through the hair without forcing it at
a faster rate, as this may create a pulling sensation.
Use short strokes when cutting and initially use the longest
trimming guide. You can always use a closer trimming guide
later if you want a closer cut.
HOW TO GIVE A HAIRCUT
1. Start at the back of the head. Holding the clipper as shown,
lightly stroke upwards making sure you are taking off the
desired amount of hair. Work your way up to the crown of the
head in layers. When completed, comb the
area to remove any loose hair and determine
if you need any further cutting.
2. Repeat the same procedure for each side of
the head. Make sure the length of the hair is
trimmed the same on both sides of the head.
3. To cut the top of the head, hold the hair
between your fingers and cut a small
amount at a time. Cut from the front to
the back.
4. To trim around the ears and short hairs at
the nape of the neck, you must remove the
trimming guide. Angle the clipper and
lightly stoke around each ear to the back of
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children
are present, basic safety precautions should always be
followed, including the following.
KEEP AWAY FROM WATER
• Always unplug it immediately after using.
• Do not place or store the appliance where it can fall or be
pulled into a bath or sink.
• Do not use while bathing.
• Do not place or drop into water or other liquid.
• Remington strongly recommends that an approved Safety
Switch (residual current device) be fitted to protect all bathroom
power outlets. Ask an electrical contractor for advice.
WARNING –
TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC
SHOCK OR INJURY TO PERSONS:
• Do not reach for an appliance that has fallen into water.
Unplug it immediately.
• Do not use while bathing or in the shower.
• Do not place or drop into water or other liquid.
• Do not place or store this appliance where it can fall or be
pulled into a bath or sink.
• Except when charging, always unplug this appliance from the
electrical outlet immediately after using.
• Unplug this appliance before cleaning it.
• This appliance is for household use only.
• An appliance should never be left unattended when it’s
plugged in, except when charging a rechargeable appliance.
• Keep this product out of reach of children. This appliance can
be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children
shall not play with the appliance.
• Use this appliance only for its intended use as described in
this manual.
• Do not use attachments not recommended by Remington.
• Keep the cord away from heated surfaces.
• Never operate this appliance if it has a damaged cord or plug,
if it is not working properly, if it has been dropped or
damaged, or if it has been dropped into water. If any of these
things happen, return the appliance to an authorised service
centre for examination and repair.
• Never drop or insert any object into any of the appliance’s
openings.
• Do not use outdoors or operate where aerosol (spray)
products are being used, or where oxygen is being
administered.
• Make sure the cord is disconnected from the hair clipper while
storing this appliance and cord in a moisture-free area. Do not
store it in temperatures exceeding 60°C (140°F).
• Do not use this appliance with a damaged or broken cutter
unit, as injury may occur. Always make sure blades are
aligned properly.
• Always attach plug to appliance and then the adaptor to the
outlet. To disconnect, turn all controls to OFF, then remove
adaptor from outlet, then detach power cord from the hair
clipper for storage.
• Do not use an extension cord or a voltage converter with this
appliance.
• Do not wrap the cord around the appliance.
SAVE THESE INSTRUCTIONS
HAIR CLIPPER PARTS
1. Pouch
2. Clipper
3. Taper Lever
4. 25mm Trimming Guide
5. 22mm Trimming Guide
6. 18mm Trimming Guide
7. 16mm Trimming Guide
8. 12mm Trimming Guide
9. 9mm Trimming Guide
10. 6mm Trimming Guide
11. 3mm Trimming Guide
12. Left & Right Ear Trimming Guides
13. 2 Styling Combs
14. Scissors
15. Cape
16. Cleaning Brush
17. Neck Brush
18. 4 Sectioning Clips
Also included blade guard
& instruction manual.
2
3
11
10
9
8
7
6
5
4
1
17
18
16
12
13
14
15