![background image](http://html.mh-extra.com/html/remington/flex360-r-3130/flex360-r-3130_use-and-care-manual_1437247008.webp)
8
How To Order Shaver Accessories
Please refer to the shaver comparison and features chart near the front of
this manual that lists the correct replacement part number for your shaver.
It is very important to replace your head and cutters when necessary to ensure a close,
comfortable shave without irritation. We recommend they be replaced every 12 months.
Here are some signs of head and cutter wear, indicating that replacement is needed:
■
Irritation:
As the heads get excessively worn you may experience some skin
irritation. This would be especially noticeable when you apply moisturizing lotion.
■
Pulling:
When the cutters wear you may feel a sense of pulling and a loss of
closeness when you shave. This is an indication that it is time to replace your
heads and cutters.
Maintain your shaver’s peak performance!
Keep Your Shaver Performing Like New!
■
Because your satisfaction is important to us, we want to make it simple for you
to keep your new shaver performing at its peak.
■
Did you know that for the best possible shave, it is necessary to replace the
heads and cutters on your shaver every 12 months?
■
Remington makes this easy!
Two Easy Ways to Order!
1.
Call! U.S. Residents call 1-800-392-6544
Canadian Residents call 1-800-268-0425
2.
Order Online at
www.RemingtonProducts.com
5.
Lubricate each cutter with household oil.
6.
Grasp plastic case around outer corner and rotate toward the dot on the shaver
head. (Diagram O)
7.
Pull outer cutter up and off of the head assembly and remove inner cutter.
(Diagram P) Repeat steps 5 & 6 for the remaining cutters.
8.
Brush hairs from inner and outer cutters. (Diagram Q)
9.
Replace inner cutter. (Diagram R)
10
.Replace outer cutter by lining up the locator with the small dot. (Diagram S)
11
.Twist toward large indent to lock in place. (Diagram T) Repeat steps 9-11 for
remaining cutters.
12
. Reattach cover to the shaver body (Diagram U), then close hairpocket assembly.
(Diagram K)
** Trimmer:
Lubricate teeth with oil every six months.