Remii WM-55-XS, Installation And Operation Instruction Manual, Page: 17 / 24

REMOTE CONTROL OPERATION
1. Press “ ”, the flame l
the brightest mode(Y4,O
heater is not working. P
the display will disappe
fireplace.
2. Press “DISPLAY ON/O
display, twice to turn off
setting used on the firep
3. Press “Yellow” to adjus
Y4-Y3-Y2-Y1-Y0, and Y
4. Press “Orange” to adju
O4-O3-O2-O1-O0, and
5. Press “Red” to adjus
R4-R3-R2-R1-R0, and R
6. Press” TRAY LIGHT ON
display. Press again to t
light turns on, color yellow, color orange
O4,R4), the tray light in white (E3), indica
Press again to turn off the appliance, indica
ear in 5 seconds. It will recall the last
OFF” once to turn on the flame light,
the flame light, indicating “FO” on display
place.
ust the intensity of the yellow flame. Th
Y0 is when the yellow flame has turned of
ust the intensity of the orange flame. T
O0 is when the orange flame has turned
st the intensity of the red flame. The
R0 is when the red flame has turned off.
N/OFF”, the tray light turns on in color whi
turn off the tray light, indicating”E0” on dis
and color red are on
ating “ON” on display,
ating “OF” on display,
setting used on the
, indicating “FF” on
y. It will recall the last
here are 5 settings,
ff.
There are 5 settings,
off.
here are 5 settings,
ite, indicating “E3” on
splay.
For remot e t o funct ion make sure t he heat er is plugged in and main power sw it ch located on t he
bott om left hand side is at posit ion I.
When operat ing t he remot e make sure you point t he remote t o t he cent re of t he fireplace and make
sure each t ime you press t he butt on t he buzzer inside t he unit w ill beep once. It t akes some t ime for
t he receiver t o respond t o t he t ransmitt er. Do not PRESS t he butt ons more t han once w it hin t wo
seconds for correct operat ion.
HEATER ON/OFF
HIGH LOW TEMP.
YELLOW RED
DISPLAY ON/OFF
ORANGE
FLASH ADJUST
TRAY
ON/OFF
17