Remii WM-55-XS, Installation And Operation Instruction Manual, Page: 16 / 24

16
OPERATION
Plug the fireplace into a 15 Am
MANUAL OPERATION
SAFETY CUT-OFF
This appliance is fitted with
(e.g. Due to blocked air ve
reset.
To reset the appliance, dis
minutes. Reconnect the
mp wall socket.
h a safety cut-off which will operate if th
ents). For safety reasons, the fireplace w
sconnect the appliance from the main s
supply to the main and switch
he fireplace overheats
will NOT automatically
supply for at least 10
on the appliance.
The fireplace can be operated e
the fireplace, or by supplied rem
either by the touch panel located on the l
mote control.
left front top side of
1. Press “ ”, the flame light turns on, color yellow, color orange and color red are on
the brightest mode(Y4,O4,R4), the tray light in white (E3), indicating “ON” , heater is
not working. Press gain to turn off the appliance, indicating “OF” on display, the
display will disappear in 5 seconds. It will recall the last setting used on the fireplace
2. Press “ ” to adjust the flame color, F1 red, orange& yellow, F2 orange, F3 red, F4
yellow, F5 Red & orange, F6 orange & yellow, F7 red & yellow, F0 turns off the flame
light.
3. Press “ ” once, one setting of heater works, 750W, indicating “H1” on display;
Press again, two setting of heater work, 1500W, indicating “H2”. Press the third time,
the heater turns off, indicating “H0” on display. Press this button for 5 seconds,
indicating “LO”, heater is off and the button is locked. Press this button again for 5
seconds, indicating “UL”, heater is still not working but the button is unlocked.
4. Press “ ” to adjust the tray light. E0 means the tray light turns off. EE means the
color of tray light cycles through 13 colors with an interval of 1 minute.
5. Press “ ” to set the turn off time, 30-1h-2h-3h-4h-5h-6h-7h-8h-00.