Remii WM-55-XS, Installation And Operation Instruction Manual, Page: 13 / 24

HARDWIRE INSTALLAT
Turn off the appliance complete
person should service and repa
If it is necessary to hard-wire
cord connection, and wire the a
This appliance must be electric
if hard-wired. In the absence
ELECTRICAL CODE in Cana
CODE in the United States.
13
TION
ely and let cool before servicing. Only a q
air this electric appliance.
this appliance, a qualified electrician m
appliance directly to the house hold wiring
cally connected and grounded in accorda
e of local codes, use the current CSA
ada or the current ANSI/NFPA 70 NATI
qualified service
must remove the
g.
ance with local codes,
A C22.1 CANADIAN
IONAL ELECTRICAL
2. Cut off the copper head of the wiring and leave 1 cm (0.4 inch) uncovered wiring.
1. Remove the cover plate from the left side of the appliance by removing the two screws,
as shown below. Unscrew and remove power cord.