REMET CNC RS-120 OFF-ROAD, Technical And Motion Documentation, Operating Instructions, Guarantee Card, Exchange Parts Catalog

Page: 16 / 52

REMET CNC TECHNOLOGY SP. Z O.O.
Page 16 of 51
Manufacturer of machinery and equipment, machining
The rules of safe work performance
1. Before starting work, make sure that the inlet and outlet funnels are
empty.
2. During work and immediately after switching off , do not touch the
discharge channel, do not put your hands into the feeder inlet (the device will
work even for a short while after turning it off).
3. When working with a tractor that does not have an emergency stop switch or
an emergency system with which the chipper's emergency stop switch can be
pressed, it is necessary to work by two people to operate the device, the tractor
driver driving the chipper and the chipper operator (model RS120 PTO drive).
4. Operators must provide sufficient space and hardened and a non-slippery
surface to work with the device. And work only in daylight or very good artificial
lighting.
5. Operators must also ensure a good balance and stability. Do not lean
forward or stand above the device when inserting material.
6. When working, keep your head, hair and body away from the opening and
use protective goggles, hearing protection and protective clothing.
7. Operators performing work with chipper should constantly observe the
work area and immediately stop work in the event of appearance of unauthorized
persons or animals in the working area of machines.
8. Before inserting the material to be cut into the inlet hopper, pay attention
to whether the material has no foreign elements harder than wood such as
stones, wires, ropes, nails, rivets, chains, etc. that can damage the knives,
cutting mechanism or the whole machine what consequently, it can lead to a
dangerous accident that endangers the life and health of the operator and other
third parties.
9. If the operator's clothes are hooked with branches and pulled towards the
inlet of the chipper feeder, the operator must immediately press the safety
switch (in the RS-120 model, when working with the tractor, stop the tractor
operation).
10. To protect against accidental turning on the device, press the safety switch
and turn off the ignition (in the RS-120 model when working with the tractor
switch off the tractor driving the chipper, remove the key from the ignition or
disconnect the battery by removing the clamp from the clamp).
11. To prevent accidental starting of the chipper driving motor, set the ignition
switch to 0.