en
55
Installation
Indications,
functions and options
Messages
Commissioning
Operation and function
TIME
Indicates the current clock time.
Î
In order to adjust the hours, press button 3 for approx. 2 s.
Î
Set the hours by pressing buttons 1 and 2.
Î
In order to adjust the minutes, press button 3.
Î
Set the minutes by pressing buttons 1 and 2.
Î
In order to save the adjustments, press button 3.
Operating hours counter
h P / h P1 / h P2
Operating hours counter
Display channel
The operating hours counter accumulates the operating hours of the correspond-
ing relay (h P / h P1 / h P2). Full hours are displayed.
The accumulated operating hours can be set back to zero. As soon as an operating
hours channel is selected, the symbol
Ⓢ
is displayed.
Î
In order to access the reset mode of the counter, press button 3 for approx. 2 s.
Ⓢ
starts flashing and the operating hours will be set back to zero.
Î
In order to finish the reset process, press button 3.
In order to interrupt the reset process, do not press any button for about 5 s. The
display returns to the display mode.
7.2
Adjustment channels
System selection
Arr
System selection.
Adjustment range: 1 … 10
Factory setting: 1
In this channel, a pre-defined system can be selected. Each system has a set of
pre-programmed settings that can be individually changed.
If the system selection is changed later on, any previous adjustments which have
been made in the other channels will be lost. Therefore, changing the system is
always followed by a security enquiry.
Only confirm the security enquiry if you are sure that you wish to change
the system selection.
Security enquiry:
Î
In order to confirm the security enquiry, press button 3.
