Remco KWE 1060 Eco, Assembly And Operating Instructions Manual

Page: 59 / 64

14 Care and maintenance
Regular care and observation of some basic points
will ensure trouble-free operation and a long
service life.
DANGER!
Prior to performing any work, ensure the equip-
ment is disconnected from the voltage supply
and secured to prevent accidental switch-on!
Care
n Ensure the unit is protected against dirt, mould
and other deposits.
n Only clean the unit using a damp cloth. Do not
use any caustic, abrasive or solvent-based
cleaning products. Do not use a jet of water.
n Clean the fins on the unit prior to long shut-
down periods.
Maintenance
n It is recommended that you take out a mainte-
nance contract with a yearly service from an
appropriate specialist firm.
This enables you to ensure the operational reli-
ability of the plant at all times!
NOTICE!
Statutory regulations require a leak test for the
cooling cycle dependent on the refrigerant
capacity or its CO
2
equivalent. Inspection and
documentation of the work performed is to be
carried out by specialist technicians.
Type of task
Checks/maintenance/inspection
Commis-
sioning Monthly Half-yearly Yearly
General l l
Check voltage and current l l
Check function of compressor / fans l l
Dirt on condenser / evaporator l l
Check the refrigerant volume l l
Check condensate drainage l l
Check insulation l l
Check moving parts l l
Sealing test for cooling cycle l
l
1)
1) see note
59