Reloop RP8000MK2, Instruction Manual

Page: 12 / 28

ENGLISH
12
11. Firmware Settings
11.1 LED Check
Herewith you can check whether all of the RP-8000MK2‘s LEDs function flawlessly.
For the function test please proceed as follows:
1. Make sure that the RP-8000MK2 is turned off and the USB-cable is unplugged.
2. Press and hold the CUE button and the Shift button and simultaneously turn on the RP-8000MK2.
3. Now release both buttons.
4. Now all LEDs should be lit. You can turn the encoder -26- to adjust the LED brightness.
5. In order to end the test, just turn off the device via the on/off button. The LED brightness will be saved.
11.2 Firmware Upgrade
The RP-8000MK2‘s firmware can be updated. Possible firmware updates will be offered by Reloop via www.reloop.com. This guarantees that your
turntable can be updated with new features and improvements in the future.
1. Make sure that the RP-8000MK2 is turned off and connected via USB to your computer.
2. Hold the SHIFT and SAMPLER buttons and simultaneously turn on the RP-8000MK2
3. Now release both buttons. The pitch LC display will read “Update”.
4. Start the upgrade program.
5. Select the correct firmware file and press “Start”. The upgrade will now be carried out. After carrying it out successfully unplug the USB cable
from the RP-8000MK2.
NOTE! Please observe that Java Runtime Environment is installed on your computer to carry out the update. Further information can be found
under www.java.com.
11.3 Advanced MIDI-Functions
By holding the SHIFT and LOOP buttons
and simultaneously turning on the turn-
table, you will enter the advanced setup
menu. Now each drum pad is equipped with
a function that can be turned on/off. When
lit green, the function is activated, when lit
red, the function is deactivated.
TECHNICAL SPECIFICATIONS
Type: ...............................................................................manual quartz driven turntable with MIDI control
Drive: ..............................................................................quartz driven upper torque direct drive
Motor: .............................................................................brushless DC motor
......................................................................................... 3 speeds, fully manual
Turntable RPM: ............................................................. 33 1/3, 45 and 78 RPM
Turntable: ......................................................................aluminum die casting
Pitch: .............................................................................. variably adju/-8%, +/-16%, +/-50%
Torque: ........................................................................... adjustable from min. 2800 – 4500 qf-cm
Start up time / tempo change (33rpm): ..................less than 0.2 sec.
Brake system: ...............................................................electronic brake
Wow and flutter: ........................................................... 0.01% WRMS*
S/N ratio: ....................................................................... more than -55 dB
Admissible cartridge weight range: ......................... 3.5 – 8.5 g (incl. headshell 13 – 18 g)
Anti-skating range: ...................................................... 0 – 3 g
Adjustable brake time: ................................................ 0.2 – 6 sec.
USB LINK power output: ............................................ 0.2 A
Power input: .................................................................. 17 W
Power supply: ............................................................... AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Dimensions: ................................................................... 458 x 144.6 x 354 mm (w/h/d)
Weight: ........................................................................... 11.8 kg
Incl. USB cable, slipmat & tone arm illumination but without stylus
*Impact of stylus, record and tone arm not taken into account.
Note:
Subject to alterations.
The specified data is of approximate value.
DRUM PAD FUNCTION
#1 PLAY Button, Reverse Button, 33/45 Button, Quartz Lock-Button, Pitch Fader,
Torque Dial, Start/Brake Dial, 8/16%-Buttons additionally send MIDI. Please note
that the respective analogue function will not be deactivated (Default On).
#2 The start and standby sequence can be turned on/off
#3 When activated, the reverse function will be carried out for as long as the button
is being held
#4 In Platter Play mode the CUE and LOOP buttons can be used for pitch bending.
#5 (De-)activates playback speed 78 rpm