ENGLISH
43
2. using the Database Builder
In order to use the Database Builder and analyze your USB storage device proceed as follows:
Start the installed software. As first step select
the desired USB storage device and click on the
“Build” button.
Your USB storage device will now be analyzed.
After successfully analyzing the USB storage de-
vice you can exit the software. Your USB storage
device has now been successfully analyzed and
is ready for use with your RMP-2.5 Alpha.
NOtE!
When using Windows Vista the Database Buil-
der may cause problems. please refer to the
following trouble shooting:
Under Windows Vista it is not possible to carry
out the Database Builder. The cause for this
could be restricted user rights.
Click the right mouse button and select the opti-
on “Run as administrator”.
As next step click “Allow” in order to carry out
the Database Builder.
