ITEM QUANTITY
1
1
1
1
1
1
1
UNPACKING AND CHECKING EQUIPMENT
Carefully unpack the radio. We recommend that you
identify the items listed in the following table before discarding the
packing material. If any damage has occurred during shipment,
please contact the dealer immediately .
SUPPLIED ACCESSORIES
Hand strap
Belt clip
Li-Polymer battery
Charger
Switching Power Supply
Instruction manual
Belt clip
Charger
Battery
Antenna
2
Antenna
PREPARATION
CHARGING THE BATTERY PACK
Notice:
1
Hand Strap
Plug the power adapter into the proper AC wall
outlet; and insert the cable of the power adapter into
the adapter socket on the charger; Green LED lights
after it enters normal work.
Insert the battery or the radio to be charged into the
charger slot. Turn off the radio before insert it into
the charger.
Make sure the battery is in good contact with the
charger terminals. When the red indicator lights, the
charger begins to charge the battery.
After charging for about 5 hours, the red indicator
turns dim and the green indicator lights indicating
the battery has been fully charged.
Leave the battery in that sate of green indicator for 1~2 hours before
you remove it from the charger to achieve the best performance of the
battery. Then you can disconnect the power adapter from the AC
outlet.
Yellow LED lights when charging temperature or circuit is abnormal
and the charger enters protection state. Please stop charging in such
situation. Remove the battery from the charger and cut off charger
power.
* The battery is not fully charged in the factory, and please charge the
new battery when you use the radio for the first time.
* The radio is supplied with a BPRP1700 Li-poly battery manufactured
by
Switching
Power Supply