background image

The Reliable Automatic Sprinkler Co., Inc., 

103 Fairview Park Drive, Elmsford, New York 10523

Model F1FR56-300 QREC Series

300 psi (20,7 bar) Rated

Quick Response

Extended Coverage Spray

Bulletin 030 

Rev
.

 C

Bulletin 030 

Rev.

 C

Model F1FR56-300
Extended Coverage Sprinklers
Sprinkler Types

•  Pendent
•  Recessed Pendent F1/F2/FP
•  Concealed Pendent

Approval Organizations

1.  Listed by Underwriters Laboratories, Inc. and 

 

 

 

 

Certified for Canada (cULus)

UL Listing Category

Sprinklers, Automatic & Open
Quick Response Sprinkler

UL Guide Number

VNIV

Product Description 

Reliable Models F1FR56-300 QREC and F1FR56-300 

QREC recessed pendent sprinklers are high pressure 
rated automatic sprinklers which can handle a maximum 
service pressure of 300 psi (20,7 bar).

The Reliable Model F1FR56-300 QREC Quick Response 

Extended Coverage Concealed Sprinkler is an attractive, 
low profile concealed sprinkler assembly.  This sprinkler 
assembly utilizes a Model F1FR56-300 QREC pendent 
sprinkler in a Model CCP cup and push-on thread-off 
cover plate assembly. The cup is securely factory thread-
ed on the sprinkler’s inlet end. The assembly is shipped 
with a protective cap. The sprinkler and cup are easily in-
stalled into the sprinkler fitting using the Model RC1 Sprin-
kler Wrench.  The cover plate assembly is attached to the 
sprinkler cup using a flexible tooth threaded engagement.  
The cover plate is attached to the skirt using 135°F (57°C) 
ordinary temperature classification solder.

When the ceiling temperature rises, the solder holding 

the cover plate melts, allowing the release of this part and 
thus exposing the Model F1FR56-300 QREC sprinkler in-
side to the rising ambient temperature. 

These Models are quick response sprinklers which uti-

lize a 3.0mm frangible glass bulb.  These sprinklers have 
demonstrated response times in laboratory tests which are 
five times faster than standard response sprinklers.  This 
quick response enables Model F1FR56-300 QREC sprin-
klers to apply water to a fire much faster than standard 
sprinklers of the same temperature rating.

Recessed QREC

Pendent F1/F2

QREC Pendent

The glass bulb contains an accurately controlled amount 

of special fluid hermetically sealed inside a precisely man-
ufactured glass capsule.  This glass bulb is specially con-
structed to provide fast thermal response.

At normal temperatures, the glass bulb contains fluid in 

both the liquid and vapor phases.  The vapor phase can 
be seen as a small bubble.  As heat is applied, the liquid 
expands, forcing the bubble smaller and smaller as the 
liquid pressure increases.  Continued heating forces the 
liquid to push out against the bulb, causing the glass to 
shatter, operating the waterway and allowing the deflector 
to distribute the discharging water.

The temperature rating of the sprinkler is identified by the 

color of the glass bulb.

Application 

The most common applications for Model F1FR56-300 

QREC Sprinklers will be in fire protection systems for high 
rise buildings where a quick response rating is required 
and the pressure entering the sprinkler system is in excess 
of 175 psi (12 bar).  The use of these sprinklers will provide 
the opportunity to reduce or eliminate the need for pres-
sure reducing valves.

Concealed QREC Pendent

Recessed QREC

Pendent FP

Reviews: