Installation
Do not install The Concealer
â
in ceilings which have
positive pressure in the space above.
After a 2
5
8
inch diameter hole is cut in the ceiling, the
sprinkler is easily installed with the Model G4 Wrench.
The wrench has drive tangs which insert into the cup
slots. When installing a sprinkler the wrench is first
positioned into the sprinkler/cup assembly until the
wrench tangs engage the drive slots in the top of the
cup (there are two sets of drive slots in the cup). The
sprinkler is then tightened into the pipe fitting. When
inserting or removing the wrench from the sprinkler/cup
assembly care should be taken to prevent damage to
the sprinkler. DO NOT WRENCH ON ANY OTHER
PART OF THE SPRINKLER/CUP ASSEMBLY. Install the
cover plate by hand turning the cover in the clockwise
direction until it is tight against the ceiling.
The equipment presented in this bulletin is to be installed in accordance with the latest pertinent Standards of the National Fire Protection Association, Factory Mutual Research
Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable.
Products manufactured and distributed by Reliable have been protecting life and property for over 80 years, and are installed and serviced by the most highly qualified and
reputable sprinkler contractors located throughout the United States, Canada and foreign countries.
The Reliable Automatic Sprinkler Co., Inc.
(800) 431-1588
Sales Office
(800) 848-6051
Sales Fax
(914) 668-3470
Corporate Offices
www.reliablesprinkler.com
Internet Address
Manufactured by
Classification
Sprinkler
Cover Plate
Max. Ambient
Temp.
Ordinary
165°F/74°C
135°F/57°C
100°F/38°C
Temperature Rating
Sprinkler Inlet
Total
Adjustment
Nominal
Orifice
Nominal K Factor
Thread
Approvals
Sprinkler
Identification
Number (SIN)
US
Metric
Non Adjustable
Non Adjustable
Non Adjustable
Adjustable
Adjustable
Adjustable
1
2
²
(13mm)
1
2
²
(13mm)
1
2
²
(13mm)
1
1
2
²
(38mm)
1
1
2
²
(38mm)
1
1
2
²
(38mm)
1
2
²
(15mm)
7
16
²
(12mm)
3
8
²
(10mm)
1
2
²
(15mm)
7
16
²
(12mm)
3
8
²
(10mm)
5.6
4.2
2.8
5.6
4.2
2.8
80
60
40
80
60
40
1
2
²
NPT
1
2
²
NPT
1
2
²
NPT
1
²
NPT Male or Female
1
²
NPT Male or Female
1
²
NPT Male or Female
1,2,3,4
1,2,3
1,2,3,4
1,2,3
1,2,3
1,2,3
R2215
R2213
R2211
R2218
R2213
R2212
Installation Data
(1)
Consult factory on other finishes.
Note:
Paint or any other coatings
applied over the factory finish will
void all approvals and warranties.
Fig. 1 - ½
²
NPT Non Adjustable Inlet
Ordering Information
Specify:
1. Sprinkler Model
2. Nominal Orifice
3. Flat Cover
Plate Assembly Finish
4. Inlet Type
Fig. 2 - 1
²
NPT Male–Adjustable Inlet
Fig. 3 - 1
²
NPT Female–Adjustable Inlet
Model G4 Sprinkler Wrench
Revision lines indicate updated or new data.
P/N 9999970015
E.G. Printed in U.S.A. 5/05
UL Listing Category
Sprinklers
, Automatic and Open
UL Guide Number
VNIV
Standard Finishes
Bronze
Chrome
White
Special Applications Finishes
Bright Brass
Satin Chrome
Black Plated
Off-White
Finishes
(1)
:
Flat Cover Plate Assembly
