Reliable Equipment & Service PDY-2102, Operator'S Manual

Page: 11 / 16

11
SERIOUS BURN HAZARD
HOT SURFACES MAY CAUSE SERIOUS BURNS.
The hydraulic cylinder may be hot during and after operation.
CA CA
CA CA
CAUTION: UTION:
UTION: UTION:
UTION:
HYDRAULIC FLUID MAY CAUSE SERIOUS BURNS.
Never disconnect tool, hoses, or fittings while the hydraulic
power source is running or if the hydraulic fluid is hot.
Failure to observe this warning could result in serious injury.
WARNING
WARNING
CRIMP DANGER
This hydraulic crimping tool can crush and/or disable.
KEEP ALL PARTS OF THE BODY AWAY FROM MOVING PARTS.
DO NOT lock the tool in the On Position. In an emergency,
serious damage or injury could occur during the time
required to stop the tool.
Failure to observe this warning could result in serious injury
.
TOOL HAZARD
DO NOT OPERATE TOOL WITHOUT DIES.
DO NOT EXCEED THE MAXIMUM HYDRAULIC FLOW, RELIEF
PRESSURE, OR BACK PRESSURE.
Failure to observe warnings could result in tool damage or injury.
WARNING
WARNING WARNING
WARNING WARNING
WARNING
FIRE HAZARD FIRE HAZARD
FIRE HAZARD FIRE HAZARD FIRE HAZARD
An incomplete crimp may pose a fire hazard.
Always use the appropriate connector, die set, and
compression tool, as required by the intended application.
Compression tool should be tested on a regular schedule
to ensure acurate compression.
Failure to observe this warning could result in serious injury.
IF YOU HAVE ANY QUESTIONS REGARDING THE SAFE USE
AND/OR OPERATION OF THIS TOOL, CONSULT YOUR AREA SUPERVISOR,
OR CONTACT RELIABLE EQUIPMENT AT 800-966-3530