3.
USE CONNECTING ARM RAM-201U-B TO JOIN THE TWO 1.5” BALLS (ONE ON LAMP, ONE SECURELY
MOUNTED TO A FLAT SURFACE AS DIRECTED IN STEP 1) AND ANGLE LAMP TOWARD TARGET WHILE
TURNING HANDLE CLOCKWISE TO LOCK THE LAMP ORIENTATION.
4.
JOIN THE MALE BARREL JACK FROM POWER SUPPLY (UV-2031) TO THE LAMP AND TURN THE
LOCKING COLLAR CLOCKWISE UNTIL IT IS TIGHT. IF AN EXTENSION IS REQUIRED, USE UV-2007 10’
DC EXTENSION WIRE BETWEEN THE POWER SUPPLY AND THE LAMP.
5.
THE LAMPS ARE NOW READY FOR SERVICE AND WILL OPERATE WHEN THE AC SOURCE IS SWITCHED
ON. PLEASE NOTE THE MAX NUMBER OF UNITS PER 16 AMP TYPE C CIRCUIT BREAKER IS 6 AT 240V
AND 12 AT 120V.
