Doc ID: 193-714A
Doc Revision: 030518
PRESSURE PLATE SPRINGS
The Rekluse TorqDrive clutch comes with two sets of pressure plate springs so the rider can choose to
have either a lighter lever pull or more torque transfer through the clutch.
DO NOT
use higher force
springs than those included in the kit. Clutch and/or engine damage could occur from higher force
springs which could result in bike damage, injury and/or death.
NEW FRICTION DISK BREAK-IN
Failure to follow the oil screen/filter inspection process after break in could cause motor oil
delivery failure which can result in motor failure, serious injury, or death.
Following the installation of a new set of friction disks, there will be a short break in period during which
the friction disks will wear in somewhat. Following this wear in period, it is vital to inspect the oil screens
and/or oil filter.
x
Soak new friction disks in oil for at least 5 minutes
x
Install new friction disks
x
Ride the bike for an initial period
x
Inspect the oil screens and/or oil filter, and change oil as necessary
Rotate basket and ring gear in opposite directions to check
for any rotational play in the dampers
