Doc ID: 191-2847A
Doc Rev: 091020
Pg. 9
Install Clutch Pack
1. Install all of the Rekluse basket sleeves into the basket
slots. Make sure the bottom of the sleeve is facing down,
and the sleeve tabs sit against the inside of the basket.
See following pictures for reference.
Note:
When seated in the basket, the sleeve tops may sit
slightly above or below the top of the basket.
2. If the
Setup Sheet
located at the back of the manual
shows that your bike model reuses the judder spring,
reinstall only the judder spring, cupped side up.
3. Install the Rekluse clutch pack. The clutch pack varies
depending on the bike model.
See the
Setup Sheet
l
ocated at the back of the manual for the proper clutch
pack configuration.
4. Reinstall the pressure plate, OEM spring, hold-down
ring, spring cups, and bolts
Sleeve tabs sit inside the
basket
Install all the
basket sleeves
