Pg. 24
Doc ID: 191-6305A
Doc Rev: 101818
Note:
If the engine wants to stall or the creep is excessive, the
idle may be too high or the installed gap may be too small. Make
necessary adjustments before proceeding.
5. Place the bike in
NEUTRAL
and
recheck Free Play Gain. Continue
to adjust the installed gap until the
clutch lever is 1/8”-1/4” (3 mm-6
mm).
Recheck Free Play Gain
and adjust the installed
gap
Note:
Your clutch pack will expand with heat, so final adjustment
to Free Play Gain should be made when the bike is warm.
Remember not to ride without sufficient Free Play Gain.
Do not perform 2
nd
and 3
rd
gear starts with this product.
Always keep the motorcycle in first gear when taking off
from a stop. Taking off from a higher gear can cause
premature clutch wear and damage the product.
EXP TUNING OPTIONS
Adjusting the engine idle speed to match your engagement
setting is important and greatly affects the overall feel of how the
EXP disk engages.
To prevent freewheeling and maximize engine braking, set the
idle so there is a slight amount of drag while the bike is idling in
gear and warmed up. The idle should not be so high as to move
the bike forward in gear with the throttle closed. However, with a
small opening of the throttle the bike should move forward.
You can tune the engagement RPM of the EXP disk by changing
the spring configuration. The EXP disk comes set with the
recommended
“Medium”
setting from Rekluse.