Pg. 10
Doc ID: 191-6305A
Doc Rev: 101818
Clutch pack
NOTE:
The OE top and bottom friction disks have slightly
narrower tabs than the other 7 friction disks. The Rekluse
supplied thick friction disk also has this same narrow-tab feature
so that it fits properly into the slots of the OE basket.
1. Install a .060” (1.5 mm) thick steel drive plate into the clutch
basket first.
2. Install a .124” (3.15 mm) thick friction disk, then install another
.060” (1.5 mm) thick steel drive plate.
3. Install
ALL
the Rekluse basket sleeves into the OE basket
slots with the tabbed side facing toward the inside of the clutch
basket. Push the down until they contact the tabs of the first
thick friction disk.
BASKET
TANG
BASKET
SLEEVE
3rd-Thick
steel drive
1
st
-Thick steel
drive plate
2
nd
-Thick friction disk
