Pg. 20
Doc ID: 191-7913A
Doc Rev: 082018
2. Use your thumbs to compress the
piston until it bottoms out, then release
it.
3.
Pour the recommended clutch fluid into
the slave cylinder port.
Be sure to use the correct clutch fluid. Check the cap of
the clutch master cylinder to determine which clutch
fluid to use. Failure to use the correct fluid will result in
seal damage and/or failure.
4. Use a 4 mm hex key to turn the
adjuster screw clockwise until it
bottoms out and the O-ring in no
longer visible. Keep the fluid
topped off as you go.
