Doc ID: 191-7008001
Doc Rev: 080720
Pg. 3
·
Lay the bike on its left side when replacing the clutch. This
makes working on the clutch easier and eliminates the need
to drain the oil.
·
Use an air or electric impact wrench to remove the center
clutch nut. If one is not available, you can place the bike in
top gear and hold the rear brake while loosening the center
clutch nut with a socket and breaker bar.
·
Channel-lock pliers work best to bend the tabs of the washer
up over the center clutch nut.
·
For optimal clutch performance Rekluse recommends using
fresh, clean oil that
meets JASO-MA
oil rating requirements.
Rekluse offers Factory Formulated Oil™ dev
eloped
specifically for Rekluse products. Rekluse Factory
Formulated Oil is a perfect complement to any OEM or
aftermarket wet clutch. Visit
www.rekluse.com
to learn more.
·
Use the torque values listed in the instructions. Otherwise,
use the torque specifications found in your OE service
manual.
TOOLS
8, 10, & 30
mm Sockets
Hex Keys
Metric
Wrenches
Torque
Wrench
Picks
Fluid Catch
Container
Hammer &
Flat Chisel
Channel-lock
pliers
5mm
