Assembly instructions
Instructions d’assemblage
Instrucciones de Ensamblaje
2019-11-20
www.rejuvenation.com
3/14
BEFORE YOU BEGIN (cont’d)
Make sure to observe all local plumbing codes.
Prior to installation, unpack and inspect both the console and marble top and porcelain lavatory for damage.
Locate the installation parts package and put in a safe place—you will need this for installation.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware
.
Installation assumes that walls and floor are plumb and level. Please make appropriate adjustments for other
conditions.
Remove any molding that may prevent the console from being set flush to the finished wall.
TOOLS AND MATERIALS
Tape
measure
Pencil
Level
Drill with appropriate drill and driver bits
Eye
protection
Clear 100% silicone adhesive caulk
Screws for securing vanity base to building framing.
CARE INSTRUCTIONS
Dust often using a clean, soft, dry and lint-free cloth.
Immediately blot up spills, then wipe with a clean, damp cloth.
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered
finish.
Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if
necessary.
