Reiner jetStamp 790, Operating Manual, Page: 86 / 282

jetStamp 790/790 MP
84
5. Maintenance
5.1. Replace Cartridge
When using special ink (MP), observe the notes in the operating instructions.
CAUTION
Health risks if ink is swallowed.
f
Don’t swallow!
f
Keep cartridge out of the reach of children!
Replace Cartridge

Fig.
C
+
E
f
Take jetStamp 790 from charging station
4
.
f
Press [MODE] until [INKJET] appears in the display menu bar.
f
Press [INKJET].
The print carriage moves into a central position.
f
Push the locking rail
10
as far back as it will go.
f
Take the old cartridge
13
out of the print carriage.
f
Take the new cartridge
13
from its packaging and remove the protective film
16
from nozzles
14
or clip.
f
When using standard ink hold the small felt pad
15
that is provided, against the cartridge
nozzles
14
until some ink appears on the felt.
f
Insert cartridge
13
at handle bar
9
in print carriage.
f
Pull the locking rail
10
forward again until it locks into place.
f
Press [INKJET].
The print carriage moves to the stamping position.
5.2. Clean Cartridge Contacts
Clean Cartridge Contacts

Fig. A + C + E
In rare cases, contamination at the cartridge contacts
17
may cause defective print results.
f
Remove cartridge
13
.
f
Clean cartridge contacts
17
at the cartridge
13
and the printing carriage with a soft cloth
that may have been slightly moistened with ethanol (spirit).