Reiner jetStamp 790, Operating Manual, Page: 71 / 282

jetStamp 790/790 MP
69
GB
2.3. Customer-specific imprints
Customer-specific imprints, P : 26 to P : 29, can be created and transferred with the
790 PCset easy.
– or –
Individual texts with a maximum of two lines can be created. Each line can contain
a maximum of 20 characters.
In the factory settings, the imprints 26 to 29 are not assigned and can be assigned
text in the device. After transfer of customer-specific imprints with the PCset easy,
individual texts can only be generated at the device again after an empty text, date,
time and/or numbering was transferred.
MODI TEXT 01
MODI TEXT 03
MODI TEXT 02
MODI TEXT 04
f
Press [MODE] until [NO/TXT] appears in the display menu bar.
f
Press [NO/TXT].
“INPUT - MODI TEXT 01” appears.
f
To insert an individual text in “MODI TEXT 01”, press [VARY].
The following characters are available:
0 ... 9
A ... Z Ç Ä Å É Æ Ö Ü £ Ø Ñ Á À ¥
Ê È Ó Ú € Í $ & * + , - . / : @
f
Press [INC].
The character sequence starts with “0” and ends with “@”.
f
Press [DEC].
The character sequence starts with “@” and ends with “0”.
f
To move one input character to the right and to change it with [INC/DEC], press [RIGHT].
f
To save “MODI TEXT 01”, press [RETURN].
f
Press [NEXT].
“INPUT - MODI TEXT 02” appears.
Proceed using the same process.
f
To save changes and to return to the main menu,
press [RETURN] twice.
The main menu appears.