Reiner jetStamp 790, Operating Manual, Page: 60 / 282

jetStamp 790/790 MP
58
1.2. Setting time and date
f
See “Setting time and date”, page 71.
1.3. Insert cartridge
When using special ink (MP), observe the notes in the operating instructions.
CAUTION
Health risks if ink is swallowed.
f
Don’t swallow!
f
Keep cartridge out of the reach of children!
Insert cartridge

Fig.
A
+
C
+
E
f
Remove the jetStamp 790 from the charging station
4
.
f
Press [MODE] until [INKJET] appears in the display menu bar.
f
Press [INKJET].
The print carriage moves into a central position.
f
Push the locking rail
10
as far back as it will go.
f
Take the new cartridge
13
from its packaging and remove the protective film
16
from nozzles
14
or clip.
f
When using standard ink hold the small felt pad
15
that is provided, against the cartridge
nozzles
14
until some ink appears on the felt.
f
Holding the cartridge handle
9
, insert the cartridge
13
into the print carriage.
f
Pull the locking rail
10
forward again until it locks into place.
f
Press [INKJET].
The print carriage moves to the stamping position.
1.4. Selecting language
f
See “Selecting language”, page 73.