Reiner jetStamp 790, Operating Manual, Page: 70 / 282

jetStamp 790/790 MP
68
2.2. Favourites Set-up
Using this function, you can reduce the 29 programmed imprints to the number that you
actually require, e.g. only four visible imprints. In this way, you can switch more quickly
between the individual imprints.
In stamping mode, imprints can be selected individually with [NEXT].
f
Press [MODE] until [SETUP] appears in the display menu bar.
f
Press [SETUP].
“SETUP - MODULE SETTINGS” appears.
f
Press [CALL].
“SM - SETTINGS” appears.
f
Press [NEXT] until “SET STAMP PICT” appears.
f
Press [CALL].
“SEL ST PICT ALL ON/OFF” appears.
Select individual imprints
f
Press [NEXT] until the required imprint appears.
f
Press [VARY].
f
To select an imprint, press [ON].
– or –
f
To
deselect
an imprint, press [OFF].
f
Repeat the process with all required imprints.
f
To move to the next imprint,
press [RETURN] once.
f
Or press [NEXT] to access the next imprint.
– or –
f
To save changes and to return to the main menu,
press [RETURN] four times.
The main menu appears.
Reactivate all imprints again (factory-setting)
f
Press [VARY].
f
Press [ON].
“SEL ST PICT ALL ON”, i.e. all imprints are selected.
f
To save changes and to return to the main menu,
press [RETURN] four times.
The main menu appears.
– or –
f
Press [OFF].
“SEL ST PICT ALL OFF”, i.e. all imprints are deselected.