1 INSTALLATION AND SETUP
7
ALPIN100 Manual © Copyright 2008 by Reimesch Kommunikationssysteme GmbH
1.3.
TRANSFORMER
ASSEMBLING AND DISMOUNTING
It is very easy to assemble or to remove the plug-in transformer. There are only very few
connections and screws to other parts of the amplifier.
The Following parts have to be (dis)connected:
•
6 pin plug socket
to the high voltage board (only 2 pins connected)
•
9 pin plug socket
to main board and G1/G2 board
•
2 pin plug socket
to tube deck
•
2 cables (Pin #1 and #4)
from the connectors on top of the transformer
•
4 screws
on the bottom of the box
!!! ATTENTION !!!
To avoid any damages, please remove the transformer
before shipping.
