EN
6
Original Instructions
You will be able to obtain a safe body position
when working by rotating the attachment.
Loosen and turn the handle attachment in an
anticlockwise direction. Then tighten the handle
attachment.
Depth stop
Wing Nut
Loosen the wing nut and place the depth stop in
the hole. Adjust the depth stop and retighten the
wing nut.
Dust collection device
Before carrying out hammer-drilling work vertically
overhead pull dust collecting device over the drill bit.
Choose function
This machine has three switchable functions;
drilling, percussion drilling and chiseling. These
can be selected using function switches 3 and 6.
Drilling -
Select this mode for drilling into wood,
plastic and metal products.
Percussion drilling -
Select this mode for drilling
into brick, concrete and masonry products.
Chiseling -
Select this mode for light chiseling of
brick, concrete and masonry products.
ѥ
WARNING! WHEN HAMMER DRILLING
ONLY APPLY A LOW PRESSURE. TOO MUCH
PRESSURE WILL PLACE UNNECESSARY LOAD
ON THE MOTOR.
Safety clutch
The safety clutch is activated if the drill become
jammed or caught. This prevents the machine from
being wrenched out of your hand.
MAINTENANCE
Lubrication
Summary of Contents for HD1116
Page 36: ......
