EN
4
Original Instructions
SYMBOLS
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Double insulated for additional
protection.
Conforms to relevant safety standards.
Wear hearing protection.
Wear eye protection.
Wear respiratory protection.
Read the instruction manual.
SPECIFICATIONS
Power Supply
230V~ 50Hz
Power Input
1150 Watts
No-load Speed
750/min
No. of Impacts
3400/min
Drilling Capacity
Wood 40mm
Concrete 30mm
Metal 16mm
Noise Emission
L
pA
=95dB(A) K
pA
=3dB(A)
L
wA
=106dB(A) K
wA
=3dB(A)
Typical weighted vibration
Hammer drilling into concrete
a
h,HD
=11.66m/s
2
, K=1.5 m/s
2
Chiselling
a
h,Cheq
=10.90m/s
2
, K=1.5 m/s
2
The sound intensity level for the operator may
exceed 85dB(A) and sound
protection measures
are necessary.
Note:
-
that the declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one
tool with another;
-
that the declared vibration total value may also
be used in a preliminary assessment of exposure.
Warning:
-
that the vibration emission during actual use of
the power tool can differ from the declared total
value depending on the ways in which the tool
is used; and
-
of the need to identify safety measures to protect
the operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such
as the times when the tool is switched off and
when it is running idle in addition to the trigger
time).
INTENDED USE
This electric hammer can be used universally
for drilling on wood and metal, hammer-drilling
on concrete, stone and chiseling. Any other
applications are expressly ruled out.
CAUTIONS
THIS TOOL IS FOR OCCASIONAL DIY USE ONLY.
IT IS UNSUITABLE FOR USE
IN COMMERCIAL CONTRACTING AND
EVERYDAY PROLONGED USE.
WHEN MAKING ANY ADJUSTMENTS, ENSURE
THAT THE ELECTRIC HAMMER IS UNPLUGGED
FROM THE MAINS.
Summary of Contents for HD1116
Page 36: ......
