TX-100 & XRE-100 units are not communicating:
1 - Check the Run LED on the XRE-100. Normal operation will be orange LED flashing once a second.
2 - Press the button on the TX-100. When pressed, the TX-100 will send a radio test packet and the RED TRANSMIT
LED will illuminate. If the paired XRE-100 is online, it will acknowledge with a radio test packet – indicated by a momen-
tary on the green receive LED.
If you do not see the transmit and receive LED lights activate:
1 - Power cycle the XRE unit.
2 - Move the XRE-100 unit to a higher location and avoid mounting on/in metal objects
If you are not getting the desired range between
the TX-100 and XRE-100 unit:
1 - Ensure the XRE-100 has at least 1-amp of power dedicated to itself.
2 - Ensure the TX-100 is fully charged.
3 - Move the XRE-100 unit to a higher location - and avoiding mounting in/on metal objects
4 - Check that the potentiometer on the TX-100 board is turned to full power. (All the way to the left)
. TROUBLESHOOTING
XRE LED GUIDE
10