Repeat steps 1-4 for lower A-Frame
Scissor upper A-Frame until ball-lock pin is
adjacent to beam
Remove ball-lock pin and continue scissor motion
until stops engage beam and holes are aligned
Repeat steps 6 and 7 for opposite A-Frame
Re-insert ball-lock pin into hole ensuring the pin
is fully engaged through hole. A gentle rocking
motion can be used to induce alignment
5
6
7
8
Assembly Instructions
Be careful not to trap hands between beam and cheek plates!
If fitted, ensure castor brakes applied before lifting a load.
Continue rotation of A-Frame until it comes to rest
on ground
4