REICH 3447, Technical Data Spare Parts

Page: 4 / 36

4 I English 3447
Karl M. Reich Verbindungstechnik REICH ®
1 TECHNICaL DaTa
Type
3447
Dimensions mm 315/415
Weight kg (without fasteners) 3,2 kg
Single sequential
Recommended operating pressure
range
6 - 8,5 bar/
0,6 - 0,85 MPa
Maximun permissible operating
pressure
8,5 bar/
0,85 MPa
air consumption per driving
operation
2,6 l bei 6
bar / 0,6 MPa
Magazine capacity. No. of
fasteners 80
Penetration depth setting no
Fastener: Corrugated fastener
Height x width mm 3,0 x 35
Lenght mm 25
Recommended lubricant
1 litre special oil. Code No.
9 4420
250 cm3 grasa especial. Code No.
68 3868
2 NoISE/VIBRaTIoN INfoRMaTIoN
Noise characteristic values * 3447
a-weighted single-event emission
sound pressure level at work
station L pa, 1s 82 dB(A)
a-weighted sound power level
L Wa, 1s, d 95 dB(A)
Vibration characteristic values **
Weighted r.m.s.-acceleration (a),
a h, w, 3s 3,5 m/s2
The noise level when working can exceed 85
dB (a). Wear ear protection!
* Measured values determined according to
EN 12549:1999.
** Measured values determined according to
ISo 8662-11:1999.
3 SuPPLIED WITH
1 Nailer for corrugated fasteners
1 Tool use and safety instructions
1 Technical data sheet
4 fILLING THE MaGazINE
Only those fasteners specified under technical data
(see 1) may be used.
When filling the magazine, hold the tool so that the
muzzle is not pointing towards own body or towards
any other person.
Do not load the tool with fasteners with the safety
yoke or trigger depressed.
Pull back the catch lever (20 009) for release and open
the magazine. The corrugated fasteners must be
inserted with the red mark at the top. after loading
of the corrugated fasteners, close the magazine so
far until it engages.
5 aCCESSoRIES
Code No.
Balancer for 30-55 N (3.0-5.5 kp),
cable travel 2.0 m (6.5 ft) 28 6478
Suspension
71 3287