Version 06/21 Page 6 of 23 ICON 35 UM EN
5. Label
This is an example of the product label it is located on the cross bar.
6. Usage
How to lift the chair
Lift the wheelchair using the push handles and the front upper corners of the wheelchair
frame, where the leg rests are attached.
WARNING! It is not allowed to lift the wheelchair by holding it by the legrests or the
armrests! We recommend detaching the legrests before lifting the chair.
Techniques to get in and out of the wheelchair
Teaching techniques of transferring the User must be done under the strict supervision of qualified staff. We only
present our recommendations below
Transferring the User from the wheelchair to the bed
The User should face the bed without regard on the fact if the other
person helps or not. Drive the wheelchair as close to the bed as
possible and ensure, that front wheels are facing towards. Pull the
brake, lift the armrests / side panels on his side of the wheelchair,
on which the transfer to the bed will take place.
Transferring the User from the bed to the wheelchair
The User should face the bed without regard on the fact if the other
person helps or not. Drive the wheelchair as close to the bed as
possible and ensure, that front wheels are facing towards. Pull the
brake, lift the legrests. Do not climb the legrests, it can cause falling
over the wheelchair. The Attendants should use mainly the strength
of muscles of legs to draw the wheelchair on stairs avoiding the
excessive bending down and impairing the muscles of backs.
Driving the wheelchair
The correct weight distribution is a basic element of proper wheelchair usage. The correct wheelchair operation
depends not only on weight but also on body proportions, the position of the person seating in the wheelchair and the
position of the rear wheels. The larger the weight proportion of the User resting on the rear wheels the easier it is to
propel. The larger the weight proportion of the User resting on the front wheels the harder it is to propel the
wheelchair.
Serial number in
standard GS1
(UDI-DI)
Barcode EAN -
GS1 128
Barcode EAN 13
in standard GS1
Product name
Production date
Item number
Seat width
Max user weight
Max gradient
Seat depth
Can be used
outdooor
Medical Device
Familiarize
yourself with UM
Manufacturer
