background image

  Version 06/21                                                                                  Page  3 of 23                                                                             ICON 35 UM EN 

 

 

1.  General information 

 
Dear customer, 

 
Thank you for choosing an

 ICON 35

 wheelchair.  

This User manual contains a description of the medical device and important guidelines to ensure a correct and safe 
usage of the product. Please read this manual carefully. It is especially important to read the safety requirements and 
to follow these.  

REHASENSE®

  continuously  develops  its  products  and  reserves  the  right  to  change  specifications  and  functions  of 

products without notice. 
The 

ICON  35

 wheelchair  is not allowed to be used as a vehicle seating  option in moving vehicles (like private cars, 

buses, 

trains, metro etc.). For detailed information please refer to the chapter “Transport recommendations”. 

By queries please contact your dealer or 

REHASENSE®

 directly. The contact data is located on the last page of this 

manual. 
 

2.   Intended use, indications & Contra-indications 

 

Intended  use:  The  manual  wheelchair  is  a  medical  device  indicated  for  use  by  persons  with  limited  motion  abilities 
who are unable to stand, walk and/or seat independently. It is dedicated for transportation and moving of such people 
in  sitting  position.  Users  can  move  with  the  wheelchair  independently  (when  fitted  with  larger  rear  wheels  and  push 
rims)  or  with  a  help  of  an  Attendant.  The  chair  can  be  used  indoor  and  as  well  as  outdoor  on  different  surfaces 
(asphalt, concrete, stone and gravel) in good weather conditions. Any other use is prohibited. 

Indications:  The  device  is  specifically  indicated  for  individuals  who  (because  of  the  wide  variety  of  possible  health 
problems)  are  unable  to  stand  and/or  walk  and  so  they  need  a  transportation  device  to  maintain  some  or  all  daily 
tasks. 

Contra-indications: This type of wheelchair must not be used by persons with flaccid paralysis or other diseases that 
cause serious body control problems. Such persons require special wheelchairs designed for an extra stable support 
of  the  User  body.  The  need  and  possibility  of  usage  of  an 

ICON  35 

wheelchair  should  be  always  estimated  as 

indicated  by  a  physician  or  a  physical  therapist.  The  manual  wheelchair  is  a  medical  device  indicated  for  use  by 
persons  with  limited  motion  abilities  who  are  unable  to  stand,  walk  and/or  seat  independently.  It  dedicated  for 
transportation and moving of such people in seating position.

 

 

3.  Safety Warnings & Recommendations 

 

Safety and quality standards 

The 

ICON  35

  wheelchair  has  passed  all  necessary  tests  and  it  is  in  conformity  with  following  European  Standards: 

PN-EN 12182:2005; PN-EN 12183:2010; PN-EN 1021-1:2007; PN-ISO 7176-1,3,5,7,8,15.  
The conformity is visible by the CE marking on the medical device. Upon a correct usage of the wheelchair we foresee 
its failure-free work for years.  

 

 

The 

ICON 35 

must not be loaded with more than 115 kg. 

 

 

The 

device must not be loaded for use in approved transport vehicles

.

 

 

Make sure that this User 

manual is read by all persons using the device. The manufacturer doesn’t take any 

responsibility for damages and/or injuries, caused by the fact that the User manual has not been followed.

 

 

Use the product only in good technical condition.

 

 

Use the device only for the purpose it is intended for. 

 

Avoid making constructive changes on the device unless you have the manufactur

er’s written acceptance for 

such modifications.

 

 

 

During different adjustments which are possible on the device the User must take care not to squeeze fingers 
or other body parts between two moving elements of the device 

 

All  wheels  should  ALWAYS  be  in  contact  with  the  floor  during  use.  This  will  ensure  the  device  is  properly 
balanced and should avoid incidents.

 

 

 

When using the wheelchair in a stationary position, the hand brakes MUST be locked

 

 

If defects or errors are detected, you must immediately contact your dealer.

 

 

Follow the instructions and warnings on all product labels.

 

 

The device must only be used on a stable surface. 

 

 

Avoid skin burns during usage of the chair in direct sunlight. Various parts of the product might become hot.

 

 

It is not recommended to use the wheelchair on sand, in mud or in extreme weather conditions.

 

 

The attendant of a wheelchair User should be in good shape.

 

 

Do not remove by yourself any parts or accessories of the wheelchair. It may influence product's stability and 
rigidity.

 

 

Do  not  place  the  device  near  to  the  sources  of  heat  or  fire  (fireplaces,  ovens,  heaters,  stoves).  It  is  not 

Summary of Contents for ICON 35
























Reviews: