User manual of Tilty
page 26 of 43
9.3 Adjustment of seatback by 40°
Tilty’s seatback may be adjusted
backwards by 40° in small steps. For
this, pull the string’s hook on the
back and make sure that both
locking bolts have really come out.
Keep the string pulled out and get
the seatback in the required
position. Then let go the string and
make sure that both bolts are really
firmly interlocked. For folding
forwards the seatback for transport, proceed in the analogous way.
Urgent safety precaution
Never fold backwards the seatback without active supporting wheel – otherwise Tilty
might turn over backwards due to the changed centre of gravity.
9.3 Restretchable back cover cloth (as option)
With its velcro fastener, the restretchable back cover cloth enables you to regulate
exactly at different points how far and where the cover cloth should be springy. For
this, just open the velcro connections and re-adjust them according to your needs.
We recommend opening and closing the velcro fastener slowly, so that it will
remain intact for a long time, otherwise the small hooks will soon tire out. Once
again, we recommend cleaning the backrest with a gentle cleaner from time to
time.
9.4 Fixed back hollow moulded (as option)
The designs of our fixed hollow moulded
back are variable in their form and hollow.
Yet, the fastening system is alike on all of
them. For inserting the fixed back, open at
first the attaching bolts (hang-up bolts) by
pulling them out with the button and then
turning them by 90°. Now slide the backrest
downwards along the back tubes until the
pins underneath are in the intended slots. Then press the back into the back tubes’
direction and fasten the hang-up bolts by turning them by 90° once again. You will
hear the bolts snapping in. For removing the fixed back, proceed in the analogous
way.
Make sure that both bolts are really firmly interlocked, otherwise the backrest
will be a danger.
9.5 Lateral truss pads (as option)
If the wheelchair is equipped with
truss pads, you may adjust them in
Summary of Contents for Tilty Typ 600
Page 1: ......