User manual of Tilty
page 24 of 43
8.3 Spoke cover (as option)
Depending on the design, the spoke cover is attached to the spokes by clips or
cable fixers. For the most part, these parts may not be used twice if the spoke cover
has been removed.
8.4 Wheel cover (as option)
The most important purpose of the wheel cover is to
protect your child’s hands from getting injured, but it
will also keep off the dirt caused by the rotating
driving wheels. At our works, we have adjusted the
wheel cover in the optimum position.
So, if you want to modify the wheel position, you will
also have to re-adjust the wheel cover. For this, the
screws on the wheel cover holder must be loosened,
then get the wheel cover into the needed position by
means of the slotted holes. Re-tighten the screws -
and off it goes!
In case the wheel cover holder is bent out of shape,
please ask your medical service centre, so that the
aluminium parts will not be broken off or the paint
layer will not peel off as the part is bent improperly.
Summary of Contents for Tilty Typ 600
Page 1: ......