background image

User manual of Tilty

 

                                       

page 15 of 43 

 

 

 

5.7 Transporting the wheelchair 

First of all we have to point out that transporting a person sitting in a wheelchair 
signifies a considerable security risk!   

In principle, a wheelchair may only be transported unoccupied!  

Therefore, transporting and securing a wheelchair in a vehicle, with or without 

occupant, is always at your own risk. Sorg Rollstuhltechnik GmbH & Co.KG will not be 
liable for injured people or damaged materials, resulting from such a transport.  
At its immovable points the unoccupied wheelchair must be secured in the vehicle 
with suitable securing devices, so it will not put passengers in danger in case of a 
sudden brake manoeuvre! 
In order to transport a wheelchair as instructed, it must absolutely be equipped with 

an AMF-system or a similar retention system with MOT-certificate (Technical Authority 
Inspection). In addition to this, the vehicle must be equipped with a headrest, firmly 
connected with the vehicle, as well as with an integrated person retention system on 
the basis of three point seatbelt if the wheelchair is to be transported together with its 
occupant.  

More questions? Do not hesitate to contact us, just give us a call:  
service phone +49 7254-92790. We will be pleased to give you advice and to refit 
your Tilty if necessary. 

 
 

5.8 Rolling off 

With the tilt clip, the assistant may tilt the wheelchair and then pull the chair 
backwards over the obstacle on the tubes of the sliding handles.  

Safety precautions: 

 

In no circumstances you may pull the wheelchair on the sliding rod, nor on the 
extendable sliding handles or the sliding handle caps. The sliding rod or the 

extendable sliding handles could unintentionally be tightened improperly, meaning 
that the respective sliding handles could be loosened resulting in bad injuries.   
For your safety, a second person should support and safeguard the action beneath 
the wheelchair – only use the frame, not the leg supports!  

 

 

5.9 Carrying 

Your child should, together with its wheelchair, be carried by an assistant only in 
extremely seldom exceptions. To the most part it will be easier rolling off the 
wheelchair over the obstacle with its driving wheels! And if it really should be 

unavoidable, only frame and back tubes are suited for carrying.   

Safety precautions: 

 

The extendable sliding handles, as well, may in no circumstances be used for carrying 
the wheelchair. When wheeling with your chair, never use escalators! Not even with an 
assistant and especially not being carried! Department stores and public institutions 

with escalators always have suitable elevators.  

Summary of Contents for Tilty Typ 600












































Reviews: