9
│
RTC 6i - www.regulus.eu
3.3. Minimum distances
The heat pump itself is intended for outdoor
installation, it is usually placed to the outer wall
of the building, with the fan facing away from
the building. At least 2 m of free space must be
maintained in front of the heat pump. The location
must be chosen so that the air can flow completely
freely through the heat pump. Used cold air should
not be sucked again into the inlet on the back as
this will cause the performance parameters of the
heat pump deteriorate.
If the product is placed in an area where it will be
exposed to particularly harsh weather conditions or
if there is a risk of damage from snow falling from
a roof, the product can be installed underneath a
small awning.
Follow the recommendations below when choosing
a heat pump location:
Location:
make sure that the heat pump does not
disturb you or your surroundings with noise, avoid
installation at a bedroom window, patio or fence, or
close to the boundaries of neighbouring properties;
if possible, we recommend not installing the heat
pump in a corner; when placed in a corner, the
resulting sound pressure level may increase due to
reflections from the surrounding walls.
Material
of surrounding surfaces: avoid using
materials with increased sound reflectivity; it is
unsuitable, for example, to line the surrounding
surfaces with ceramic tiles.
≥ 300
≥ 300
≥ 300
