3
│
NBC 170 HP - www.regulus.eu
1 - Description
NBC Hot Water Storage Tank with one stainless-steel heat exchanger, G 3/4“ connections (e.g. to connect
a heat pump).
For the correct functioning of the tank it is necessary to optimally design a hot water heating system including
a heat source, safety elements and shut-off valves in compliance with the respective standards and rules.
The hydraulic variant shall be selected respecting the heating controller used. For a connection example, see
Chapter 5 of this document.
1.1 - Models
One model of 162 l total capacity.
1.2 - Tank protection
The entire tank is made of stainless steel which guarantees a ling service life. Further qualitative improvement
is reached thanks to a magnesium anode rod installed inside the tank.
1.3 - Thermal insulation
Tanks are supplied with 50 mm thick EPU insulation, white surface.
1.4 - Connection points on the tank
2× top with G 3/4“ inner thread, for the heating coil
2× top with G 3/4“ inner thread, for cold water inlet and hot water outlet
1× top for temperature sensors, G 1/2”
1× top with G 3/4“ inner thread, for recirculation
1× top with G 3/4“ inner thread, for magnesium anode rod
1× lateral G 1/2“ with drain valve
1.5 - Packaging
Tanks are delivered standing, each screwed to its pallet, packed in bubble wrap.
2 - General Information
The appliance shall be installed by a qualified person according to valid rules and Manufacturer‘s Instructions.
This Manual is an integral and important part of the product and must be handed over to the User. Read carefully
the instructions in this Manual as they contain important information concerning safety, installation, operation
and maintenance. Keep this Manual for later reference.
Using the tank for other purposes than stated above is prohibited and the manufacturer accepts no responsibility
for damage caused by improper or wrong use.
