9
│
8. Fit the 3/4” ball valve (code 998) to the tank and the 3/4” FF hex nipple (code 6970) into
the valve, both these components are included in the Kit code 13234. Turn the ball valve
into the position shown in the
fi
g.
9. Fit the ball valve and elbow assembly (code 13236) into the lower 1“ opening.
10. Align the metal sheet against the four pins and
fi
x it using 4 screws M6x16 with washers
(codes 12996 and 7853) - both these components are included in the Kit code 12226.
Do not forget to place insulation washers under the metal sheet and loosen the clamps.
Fit the pump station with 4-way mixing valves (code 12224 or 12225). Using a 5/4” union
nut, connect it with the angled valve assembly mounted earlier (see point 5). Tighten the
clamps.
