3.
Prior to fitting the actuator on the
plastic adapter, switch it to manual
control, set the control knob exactly to
the middle of its movement range.
4.
Fit the actuator onto the plastic
adapter. Check its turning: the control
knob shall be able to turn freely both
to left and right by 45° (when turned to
the right by 45° the path 3 is closed,
and when turned to the left by 45° the
path 2 is closed). Having performed
the check, tighten the fastening screw
and switch back to motorized control.
5.
The actuator shall be installed in the
same manner as in the figure.
control mode switch line in sightglass
motorized control
manual control
control knob
©2022 We reserve the right to errors, changes and improvements without prior notice.
REGULUS spol. s r.o.
E-mail: [email protected]
Web: www.regulus.eu
v1.1-05/2022
