20
2.2 Preparation for use
2.2.1 Safety measures when preparing
the device
2.2.1.1 DO NOT SWITCH ON THE DEVICE IN
CASE OF ITS MALFUNCTION!
2.2.1.2 Do not use the device when the USB
cable is damaged. If damaged, replace the USB
cable before using the device.
2.2.2 Putting the device into operation
1. Unpack the device.
2. Take out device components.
3. Check the delivery set in accordance with
paragraph 1.3.
4. Inspect the device components visually and
make sure they are not damaged.
5. Dry the reader by storing it for at least 3 hours
indoors at the relative humidity not more than 80 %
and temperature ranging from +15 to +25 °C.
6. Make sure the device has no mechanical
damage and the object glass
2
(see Figure 1) is clean.
Note:
Keep the packaging for further repacking of
the device.
2.2.3 Preparing the device for operation
2.2.3.1 Preparing the PC for operating the device
1. Switch on the PC according to its manufacturer’s
manual.
2. Load the OS and log in as a user with
administrator rights.
