21
3. Make sure that PC hardware and software
configuration meets the requirements given in
paragraph 1.2.6 of the Guide.
4. Launch the application
Regula Document
Reader SDK.exe
from the DVD disc which is
provided in the delivery set (
\DR_RFID SDK\EXE
directory) or from the installation file downloaded
from the website www.regulaforensics.com (in case
there is no installation disc). Follow the instructions
of the wizard to install the device software
(the camera driver and DR SDK).
2.2.4
Preparing the reader
1. Follow the steps described in paragraphs 2.2.2
and 2.2.3.
2. Connect the reader to the PC with the USB
cable from the delivery set. Connect both type-A
plugs of the cable to two available USB ports of
the PC first, and then connect the mini B plug of
the same cable to the device. A pop-up message
will appear on the PC monitor saying that new USB
devices are found. The OS will start automatic
driver installation.
3. When the driver installation is complete,
the reader state indicator
3
should light up yellow or
orange. It means that the camera driver of the device
was successfully installed.
2.2.5 Checking device operation
1. Launch the application
Readerdemo.exe
from the shortcut on the PC desktop.
