Regul' Electronique Double Phredo, Manual And Installation

Page: 2 / 16

2
Precautions for use
Security
Transshipment
- Make sure that the power supply voltage of
the device does not exceed 240v AC, or
50Hz.
- If liquids or any object had entered the
housing, disconnect the electrolyser and
have it checked by a qualified technician
before handing over the service.
- Prohibition of drilling the box.
- The electrical control cabinet must be find
near the electrolyser and be easy to
access.
- This device is not disconnected from the
power source as long as it stays connected
to the electrical control cabinet, even if it
has been turned off.
- After turning off the power at means of the
on/off switch, do not open the device before
total extinction of the lights.
- Do not install the electrolyser nearby from a
source of heat.
- Do not store product cans chemical near the
device.
Keep the original carton and the packaging
material; they will be very useful if one must
ship the device back one day.
To ensure maximum protection, repack the
device as packed at the factory.
Phredo is an electrical device that must not
be exposed to rain or moisture.
To correct the pH, never use hydrochloric
acid but pH-ready to employment.
The technical room must be correctly
ventilated.
The power supply must be protected
upstream by a differential circuit breaker
30mA.
To avoid any risk of electrocution, open the
box only for its installation or service
intervention (to change an electronic card),
after having cut the power supply.
Advisory
Regul electronic designs and
manufactures on site, in France,
all of its products of salt electrolysis, pH
regulation and water level regulation.
- Y o u h a v e j u s t b o u g h t a
Régul’Electronique device, thank you
for your trust.
- U n l e s s o t h e r w i s e s p e c i f i e d
particularly, the guarantee of our
devices are 3 years from the date of
your invoice.
- The cells and the pH probes have a
guarantee of one year.
- Excluded from the guarantee are all wear parts
(fuses, batteries, seals, valves, pump etc ...)
- This warranty is limited to the suppliers of our Society.
It consists of the repair, by us and in our workshops,
defects in manufacturing and matter, that the customer
will have to prove.
- The equipment must be returned to us Free of
charge.
Costs of removal, rests and transportation are
excluded of the guarantee.
- In all cases, our liability is limited to replacement of
defective parts without no compensation or damages
and interest be claimed for material or bodily injury
caused.
- The warranty ceases when our equipment is modified
outside our workshops.
- The warranty does not apply to replacements or
repairs that would result from normal wear and tear of
material, deterioration or accident from negligence,
lack of supervision or maintenance, non-conforming
installation or abnormal use of the devices.
- In cases of inappropriate treatments and
adjustments, our responsibility cannot be engaged,
especially in case of corrosion, paint snags and
defects related to excessive constraints of use, or if the
equipment must, by these conditions, be brought to
work at too fast rates supported.
Régul’ Electronique