Manual Corrigo E Ventilation, revision M
Chapter 8
Access rights
53
Chapter 8 Access rights
There are four different access levels, System level which has the highest access, Service level,
Operator level and the basic “no-log on” level. The choice of access level determines which menus
are shown, as well as which parameters can be changed in the displayed menus.
System level gives full read / write access to all settings and parameters in all menus.
Service level gives access to all menus except the submenus Configuration/In- and Outputs and
Configuration/System.
Operator level gives access to all menus except Configuration
.
The basic level only permits changes in Running mode and gives read-only access to a limited
number of menus.
Repeatedly press down-arrow when the start-up display is shown until the arrow-marker to the left
of the text-list points to Access rights. Press right-arrow.
Log on
Log off
Change password
8.1 Log on
Log on
Enter password:****
Present level:None
In this menu it is possible to log on to any access level by entering the appropriate 4-digit code.
The log on menu will also be displayed should you try to gain access to a menu or try to do an
operation requiring higher authority than you have.
Press the OK-button and a cursor marker will appear at the first digit position. Repeatedly press the
up-arrow until the correct digit is displayed. Press the right-arrow to move to the next position.
Repeat the procedure until all four digits are displayed. Then press OK to confirm. After a short
while the text on the line: Present level will change to display the new log on level. Press left-arrow
to leave the menu.
8.2 Log off
Use this menu to log off from the present level to the basic "no-log on" level.
Log off?
No
Present level:System
Automatic logoff
If the access level is Operator, Service or System, the user will automatically be logged off to
Normal after a settable time of inactivity. See also the section Automatic logoff. It is possible to
remove the automatic logoff, see 8.4 below.
