Reggiani uniSio, Manual

Page: 7 / 28

device fastened to it either on or off .
MOUNTING THE REFLECTOR
Depending on the light source chosen, 130 mm and 195 mm dia. luminaires may be fitted
with a reflector. In particular:
INSTALLATION/REPLACEMENT OF LAMPS
Disconnect from the mains and following the instructions given below
Low voltage halogen lamp HR-GS/UB GU5,3 50W max, ( fig.11 )
Pull the lamp to disengage it from the retaining springs;
Replace/fit the lamp with max. power rating as specified on the label;
push the lamp into the seat until engaged.
Mains voltage halogen lamps HR-GS/UB GZ10 50Wmax, Metal halide lamps
BRITESPOT GX10(35W) (only for self-protected lamps) (
fig.12 )
turn the lamp anti-clockwise to disengage it from the lamp holder;
replace/fit the lamp with max. power rating as specified on the label;
insert the lamp in the lamp holder and turn it clockwise to engage it
Low voltage halogen lamps HM-GS/UB G53 75Wmax (only for self-protected lamps)
(
fig.13 );
Pull the lamp to disengage it from the retaining springs;
Remove the Faston terminals and replace/fit the lamp with max. power rating as specified
on the label;
Engage the Faston terminals on the lamp pins, being careful to kept the shielding part
facing outwards.
Attach the lamp to the springs
Metal halide lamp MT/UB G8,5 35/70W; G12 35/70/150W; Low voltage halogen lamp
HS-G/UB GY 6,35 50Wmax; Mains voltage lamp HR-G/UB G9 75W max (
fig.16 )
Remove the protective reflector by turning it anti-clockwise;
Insert/replace the lamp with one of equal rating as the ballast, see rating plate);
Re-engage the reflector correctly by turning it clockwise;
N.B. Always check the safety glass for intactness and for perfect fitting on the bayonet cap.
If it is necessary to replace the safety glass shields, always use original spare parts
art. 11300 = narrow beam reflector
PTL 20W 35W 50W 70W 150W
G8,5 2X7° 2X7° 2X8°
GY6,35 2X9° 2X6°
art. 11310 = narrow beam reflector
PTL 35W 50W 70W 100W 150W
G12 2x5° 2x5° 2x8°
GX12 2x9° 2x6°
art. 11311 = medium beam reflector
PTL 35W 50W 70W 100W 150W
G12 2x16° 2x16° 2x16°
GX12 2x15° 2x13°
art. 11312 = wide beam reflector
PTL 35W 50W 70W 100W 150W
G12 2x20° 2x21° 2x23°
GX12 2x19° 2x16°
art. 11302 = wide beam reflector
PTL 20W 35W 50W 70W 150W
G8,5 2X28° 2X28° 2X29°
GY6,35 2X15° 2X20°
art. 11301 = medium beam reflector
PTL 20W 35W 50W 70W 150W
G8,5 2x17° 2X17° 2X17°
GY6,35 2X12° 2x17°
UNISIO 7 ENGLISH